using virtual joist girders in risa-3d

Using Virtual Joist Girders in RISA-3D

The Steel Joist Institute (SJI) has developed a Virtual Joist Girder table which converts common joist sizes into equivalent wide flange beams for use in RISA-3D.

Link: SJI: Virtual Joist Girders Table

When to Use Virtual Joist Girders

The engineer should use these Virtual Joist Girders in their analysis model whenever the girders are part of a lateral frame. This should result in analysis assumptions for the strength and stiffness of the member that are closer to what the joist provider can realistically provide. This will lead to better communication between the EOR and the joist manufacturer, resulting in a quicker, more efficient design process.

Can I Use Virtual Joist Girders in my Version of RISA-3D?

Virtual Joist Girders are included as of RISA-3D v11 released December 2012.

How to Use Virtual Joist Girders in RISA-3D

The Virtual Joist Girder database will be listed as one of the database options on the Hot Rolled tab of the Shape Selection dialog as shown to the left.

Vj 1

There is a new design list used referencing all the shapes in the SJI Virtual Joist Girder table. This design list is used as part of the RISA-3D optimization or redesign routines. A Virtual Joist Girder option will appear in the Design List as shown in the Draw Members dialog to the right.

Note: This only appears when the Material is set to Hot Rolled Steel and the Member Type is set to Beam.

Vj 2

Tips on Using Virtual Joist Girders

The RISA optimization is done based on cross sectional area. So, if two shapes both satisfy stress or capacity checks , the program will choose whichever shape weighs less as the one which is considered to be more efficient. That shape will then be listed as the suggested shape as part of the redesign or optimization done by RISA-3D.

Vj 3

The only problem is that Virtual Joist Girders base their cross sectional area solely on the chord area. Therefore, a VJG20-1 is assumed to weigh exactly the same as a VJG40-1. That cannot be the case, but that is currently how the virtual joist girder tables work. As such, the optimization routines in RISA may pick deeper shapes that would truly be most efficient. For that reason, it is suggested that the engineer specify reasonable depth restrictions when using the RISA optimization routines for virtual joist girders.