RISA | Tips & Tricks

RISA | Checking Soil Bearing in RISAFoundation

Written by RISA | Jun 28, 2011

RISAFoundation has the capability to report soil bearing pressures, and check them against allowable pressures.

In the Global Parameters, under the Solution tab, be sure to set an Allowable Bearing pressure. This allowable bearing will be used as a default for your entire RISAFoundation model, unless overridden by a soil region in a particular location. Note that the Subgrade Modulus will affect load distribution within the soil, so it is important as well.

After solving, click on the dropdown next to the slab contours button, and choose Soil Pressure.

The slabs are now shown with color contours representing the soil pressure. A color coding legend also appears in the upper right corner. Note that contours which are colored white have no soil pressure, and therefore represent areas of net uplift.

For more detailed soil pressure results, check the Soil Pressures spreadsheet, which also includes a ratio of actual to allowable bearing.